Authors
1
Ministry of Higher Education and Scientific Research - Tikrit University - College of Engineering - Department of Electrical Engineering
2
Tikrit University
,
Document Type : Research Paper
Abstract
Matrix converters (MCs) have attracted significant interest and found extensive applications across multiple industries owing to their desirable characteristics. These include the capability to produce sinusoidal currents at both input and output, substantial size reduction, and enhanced reliability by minimizing significant passive components. This paper explores the potential of MC technology as a viable alternative to conventional AC-DC-AC converters in industrial applications. It discusses recent advancements in MC structural configurations, modulation/control algorithms, and multiphase structures and control systems. The paper offers an in-depth review of modern industrial uses of MC technology. It also delves into different methods for managing induction motors, particularly the DTC (Direct Torque Control) approach. The study explores the intricacies of DTC and its relationship with SVM. The primary research objective is to examine the performance of an IM when operated with an SVPWM inverter, focusing on harmonic analysis of voltages and currents. Various PWM methods regulate the voltage and frequency supplied to the IM. Sinusoidal Pulse Width Modulation (SPWM) and SVPWM are the two most commonly used 3-phase Voltage Source Inverter strategies. The growing adoption of SVPWM is driven by its ability to reduce harmonic content in voltage and enhance the fundamental output voltage of the IM. Consequently, this study models a DTC-SVM theory-driven IM using MATLAB/SIMULINK to control the speed of induction motors. The following values were calculated for the system: Quality factor=2.236, Damping ratio=4.45, and the cut-off frequency (fc=355.88H).
- I Son, J. S. Han, J. S. Park, H. S. Lim, and G. H. Lee, “Performance improvement of DTC-SVM of PMSM with compensation for the dead time effect and power switch loss based on extended Kalman filter,” Elect., vol. 12, no. 4, pp. 966, Feb. 2023, doi: 10.3390/electronics12040966.
- Charaf, L. Hocine, and M. Boubekeur, “A Novel approach for controlling with a matrix converter,” Rev. Roma. Sci. Tech., vol. 68, no. 1, pp. 24=29, Abr. 2023, doi.org/10.59277/RRSTEE.2023.68.1.
- Nandkumar, D. Shinde, and D. Shriwastava, “Implementation of DTC-controlled PMSM driven by a matrix converter,” IJRTE Intern. Jour. of Rece. Techn. and Eng., vol.8, no.5, pp 4420-4424, Jan.2020, doi:10.35940/ijrte.E6641.018520.
- Sreehari, and M. Anka, “FLC-MPC based direct torque control for matrix converter fed induction motor drive,” UGC Car. Gro. I Lis. Jou., vol.13, no.01, pp. 388-401, Feb. 2023, doi.org/11.45551/pfdgg.2023.68.1.
- Sabour, G. Bachir, and N. Henini, “Deep learning approach for open switch fault diagnosis in matrix frequency converter,” Przeg. Elektrotech., vol.96, no.1, pp. 155 – 160, Nov. 2020, doi:10.15199/48.2020.11.32
- Usoltsev, A. Tereshchenko, and A. Skorynina, “Machine Learning for Quantitative Structural Information from Infrared Spectra: The Case of Palladium Hydride,” Smal. Meth., pp. 2301397, Jan. 2024, doi.org/10.1002/smtd.202301397,” 2023.
- Rahnama, S. Ahmadian, and N. Vosoughi, “A novel torque ripple reduction of switched reluctance motor based on DTC-SVM method,” IEEE Tex. Pow. and ene. confe., pp. 1–6, Feb. 2018, doi.org/10.1109/TPEC.2018.8312070.
- Sudharani, and M. Nalini “Modeling of single-phase matrix converter using matlab,” Inter. Jour. of Adva. in Engi. and Mana., vol. 5, no. 5, pp. 282-286, May 2023, doi: 10.35629/5252-0505282286.
- Saribulut, and A. Ameen, “Student project-based space vector modulation technique for power electronics laboratory,” Electr. 12, vol. 12, no. 12, pp.2714, Jun. 2023, doi:10.3390/electronics12122714.
- Nandhini, and A. Sivaprakasam, “A review of various control sstrategies based on space vector pulse width modulation for the voltage ssource inverter,” IETE Jou. of Resea., vol. 68, no. 5, pp. 3187–3201, Sep. 2022, doi:10.1080/03772063.2020.1754935.
- Khalid, A. Mohan, and A. C. Binojkumar, “Performance analysis of vector controlled PMSM drive modulated with sinusoidal PWM and space vector PWM,” IEEE Intern. Pow.and Renew. En. Confe., pp 1-6, Oct. 2020, doi:10.1109/IPRECON49514.2020.9315210.
- Huang, Y. Xu, W. Zhang, and J. Zou, “Hybrid RPWM technique based on modified SVPWM to reduce the PWM acoustic noise,” IEEE Trans Power Electron, vol. 34, no. 6, pp. 5667–5674, Jun.2019, doi:10.1109/TPEL.2018.2869980.
- Benbouhenni, “ANFIS-sliding mode control of a DFIG supplied by a two-level SVPWM technique for wind energy conversion system,” Intern. Jour. of Appl. Pow. Eng., vol. 9, no. 1, pp. 36-47, Apr. 2020, doi: 10.11591/ijape.v9.i1.pp36-47.
- Qanbari, B. Tousi, and M. Farhadi-Kangarlu, “A novel vector based pulse width modulation for cascaded H-bridge multilevel inverters,” Jour. of Opera. and Autom. in Pow. Engin., vol. 11, no. 2, pp. 113–122, Aug. 2023, doi:10.22098/JOAPE.2023.9960.1703.
- Sieklucki, S. Sobieraj, J. Gromba, and R.E. Necula, “Analysis and Approximation of THD and Torque Ripple of Induction Motor for SVPWM Control of VSI,” Ener. Bas., vol. 16, no. 12, pp. 4628, Jun. 2023, doi: 10.3390/en16124628.
- R. Muduli, and R. K. Behera, “Virtual vector based SVPWM-DTC for five-phase two-level VSI fed induction motor drive,” Intern. Confe. on Pow. Electr. and Ene. Jan. 2021, pp. 1-6, doi:10.1109/ICPEE50452.2021.935875.
- Pipolo, A. Formentini, A. Trentin, P. Zanchetta, M. Calvini, and M. Venturini, “A new modulation approach for matrix converter,” Intern. Confe. on Po. Electr., vol. 5, pp. 1021-1027, May. 2019, doi.org/10.23919/ICPE2019ECCEAsia42246.
- Ali, A. Iqbal, and M. Khalid, “‘A review on recent advances in matrix converter technology: Topologies, control, applications, and prospects,” Inter. Jour. of Ene. Resea., vol. 2023, Aug. 2023, Art. no. 6619262, doi: 10.1155/2023/6619262.
- Manati, and A. Salam, “State space modelling and disturbance evaluation for matrix converter drives,” Univ. of Thi. Jour. for Eng. Scie., vol. 13, no. 1, pp 11-24, May 2023, doi: 10.31663/tqujes13.1.437(2023).
- Chodunaj, P. Szcześniak, and J. Kaniewski, “‘Mathematical modeling of current source matrix converter with venturini and SVM,” Electr., vol. 9, no. 4, pp. 558, Apr. 2020, doi: 10.3390/electronics9040558.
- [21] Purwanto, and G. Basuki, “Three-phase direct matrix converter with space vector modulation for induction motor drive,” IEEE Intern. Confe. on Appl. Infor. Tech. and Innov., pp. 11-16, Sep. 2019, doi.org/10.1109/ICAITI48442.2019.8982139.
- Siami, D. A. Khaburi, and J. Rodriguez, “Simplified finite control set-model predictive control for matrix converter-fed PMSM drives,” IEEE Trans. Pow. Elect., vol. 33, no. 3, pp. 2438–2446, Mar. 2018, doi: 10.1109/TPEL.2017.2696902.
- Guo, B. Yang, and C. Li “Model predictive current control of active distribution transformer with consideration of Its stability analysis based on AC-AC matrix,” IEEE Ene. Conve. Cong. and Expo., pp. 5417-5423, Sep. 2029, doi: 10.1109/ECCE.2019.8912942.
- Zhang, L. Li, and DG. Dorrell, “Control and applications of direct matrix converters: A review,” Chin. Jour. of Elect., vol. 4, no. 2, pp. 18–27, Jun. 2018,
doi.org/10.23919/CJEE.2018.8409346.
- Moati, K. Katia, and K. Mokhtari, "Improvement of DTC of wind energy conversion system based on DSIG using matrix converter," Intern. Confe. on Susta. Rene. Ene. Sys. and Appl., vol. 4, no. 5, pp. 1–6, Dec. 2019, doi.org/10.1109/ICSRESA49121.2019.9182509.
- Khyat, P. Sreehari, and M. A. Rao, “FLC-MPC based Direct Torque Control for Matrix Converter-Fed Induction Motor Drive,” UGC Car. Gro. I Lis. Jour., vol. 13, no. 1, pp. 388–401, Feb. 2023, doi: 10.2366/CGI.2023.665537.
- Aimrk, and M. Khalid, “AC-AC Converters,” In pow. Electr. Hand., Butterworth-Heinemann, 2024, ch13, pp. 437-480. doi.org/10.1016/B978-0-323-99216-
- Siami, D. A. Khaburi, M. Rivera, and J. Rodríguez, “A computationally efficient lookup table based FCS-MPC for PMSM drives fed by matrix converters,” IEEE Trans. on Indu. Elect., vol. 64, no. 10, pp. 7645–7654, Oct. 2017, doi: 10.1109/TIE.2017.2694392.
- Wang, and P. Wang, “An improved bipolar-type AC–AC converter topology based on nondifferential dual-buck PWM AC choppers,” IEEE Trans. on Pow. Electr., vol. 36, no. 4, pp. 4052 – 4065, Apr. 2020, doi.org/10.1109/TPEL.2020.3022026.
- Yao, and X. Jiang, “An optimal six vector switching pattern in matrix converters for reducing harmonics and switching loss,” CSEE Jour. of Pow. and Ene. Syst., vol. 9, no. 1, pp. 135–144, Jan. 2023, doi: 10.17775/CSEEJPES.2019.03290.
- Mennad, A.Bentaallah, Y.Djeriri, and A. Bessas, “Improved performance of a fuzzy control of double star induction motor Fed by two three-phases matrix converters,” Artif. Intelli. and Rene. Tow. an Ene. Tran., vol. 4, no. pp. 336-350, Dec. 2021, doi.org/10.1007/978-3-030-63846-7_33
- Varajão and R. E. Araújo, Modulation methods for direct and indirect matrix converters: A review,” Electr. vol. 10, no. 7, pp. 812, Apr. 2021, doi: 10.3390/electronics10070812.
- Pipolo, A. Formentini, A. Trentin, P. Zanchetta, M. Calvini, and M. Venturini, “A novel matrix converter modulation with a reduced number of commutations,” IEEE Trans. Ind. Appl., vol. 57, no. 5, pp. 4991–5000, Sep. 2021, doi: 10.1109/TIA.2021.3087121.
- Jamna, J. Pradeep, and V. Jamuna, “Comparative analysis of voltage controllers for a single stage AC-AC converter for aircraft ground power unit application,” Mate. Tod. Proc., vol. 45, no. 2, pp. 2381-2390, Jun. 2021, doi:10.1016/j.matpr.2020.10.731.
- Szczepankowski, P. Wheeler, and T. Bajdecki, “Application of analytic signal and smooth interpolation in pulse width modulation for conventional matrix converters,” IEEE Trans. on Indu. Electr., vol. 67, no. 12, pp. 10011–10023, Dec. 2020, doi: 10.1109/TIE.2019.2956391.
- Alammari, Z. Aleem, A. Iqbal, and S. Winberg, “Matrix converters for electric power conversion: Review of topologies and basic control techniques,” Intern.Trans. on Elec. Ene. Sys., vol. 29, no. 10, pp. e12063, Oct. 2019, doi.org/10.1002/2050-7038.12063.
- Deng, X. Fu, J. Tang, W. Xie, and B. Ji, “Exploring the theoretical limit of voltage transfer ratio of matrix converter under the constraint of rotating vector,” IEEE Acc., vol. 9, no. 12, pp. 153727-153734, Nov. 2021, doi:10.1109/ACCESS.2021.3127948.
- D. Ziogas, S. I. Khan, and M. H. Rashid, “Some improved forced commutated cyclo converter structures,” IEEE Trans. on Indu. Appli., vol. IA-21, no. 5, pp. 1242-1253, Sep. 1985, doi.org/10.1109/TIA.1985.349549
- Castillo, J. Hernández, P. Flores, V. Alvarado, and C. Yáñez, “Design of the input and output filter for a matrix converter using evolutionary techniques,” Appl. Sci., vol. 10, no. 10, pp. 3524, May 2020, doi 10.3390/app10103524.
- Poorfakhraei, M. Narimani, and A. Emadi, “A review of modulation and control techniques for multilevel inverters in traction applications,” IEEE Acc., vol. 9, pp. 24187-24204, Feb. 2021, doi.org/10.1109/ACCESS.2021.3056612
- Khanday, O. Sekhar, and T. Mir, “ Comparative study of three-phase AC/AC in-direct matrix converters: A review,” Intern. Confe. for Advan. in Tech., pp. 1-6, Jan. 2022, doi.org/10.1109/ICONAT53423.2022.9726119”.
- Hussain, A. Hati, P. Chakrabarti, B. Hung, V. Bolshev, and V. Panchenko, “DSVM-based model-free predictive current control of an induction motor,” Ener., vol. 16, no. 15, pp. 5657, Aug. 2023, doi: 10.3390/en16155657.
- Rahman, “Matrix converter and Its probable applications.” DC Micro. Adva. Chall. and Applic., vol. 8, no. 4, pp. 273-298, Jun. 2022, doi.org/10.1002/9781119777618.
- Saravanan, A. Sathish Kumar, R. Devasaran, G. Seshadri, and S. Sivaganesan, “Performance analysis of very sparse matrix converter using indirect space vector modulation,” Intern. Jou. of Inn. Techn. and Expl. Eng., vol. 9, no. 1, pp. 4756–4762, Nov. 2019, doi: 10.35940/ijitee.A4462.119119.
- Szczesniak, “Challenges and design requirements for industrial applications of AC/AC power converters without DC-link,” Ene., vol. 12, no. 8, pp. 1581, Apr. 2019, doi: 10.3390/en12081581.
- Tran, T. Nguyen, and L. Phuong, “Simplified space-vector modulation strategy for indirect matrix converter with common-mode voltage and harmonic distortion reduction,” IEEE Acc., vol. 8, pp. 218489–218498, Apr. 2020, doi:10.1109/ACCESS.2020.3042528.
- Israyelu, and S. Sashidhar, “Comparison of switching patterns of SVM for a novel high gain indirect matrix converter,” Ann. Conf. of the IEEE Ind. Electr. Soc., pp. 1-6, Jan. 2022, doi.org/10.1109/IECON48115.2021.959900.
- Kazmierkowski, “Modular multilevel converters: analysis, control, and applications,” IEEE Indu. Electr. Maga., vol. 14, no. 3, pp. 113-114, Sep. 2020, doi.org/10.1109/MIE.2020.3008022.
- Vashishtha, and K. Rekha, “Modified digital space vector pulse width modulation realization on low-cost FPGA platform with optimization for 3-phase voltage source inverter,” Intern. Jour. of Elect. and Comp. Eng., vol. 11, no. 4, pp. 3629–3638, Aug. 2021, doi:10.11591/ijece.v11i4.pp3629-3638.
- Malla, S. K. Gudey, and S. Sudha, “Transient and steady state characteristics of induction motor drive using DTC-SVM technique for EV applications,” IEEE Inter. Confe. on Electr. and Comp. Engin., pp. 403-406, Dec. 2020, doi:10.1109/ICECE51571.2020.9393056.
- Suhel, and R. Maurya, “Realization of 24-Sector SVPWM with New Switching Pattern for Six-Phase Induction Motor Drive,” IEEE Trans. Pow. Electro, vol. 34, no. 6, pp. 5079–5092, Jun. 2019, doi:10.1109/TPEL.2018.2870952.
- P. Jena, and K. Chandra, “Comparative analysis of the harmonic reduction of VSI fed induction motor using SVPWM and sinusoidal PWM,” IEEE Inter. Confer. on Tren. in Elect. and Infor., pp. 1-5, May 2018, doi.org/10.1109/ICOEI.2018.8553727.
E. Nandhini, and A. Sivaprakasam, “Sinusoidal PWM vs SVPWM for NPC multilevel inverter with proportional control based neutral point voltage controller for induction motor drive,” Jou. of Eng. Res. and Rep., vol. 25, no. 2, pp. 39–47, May 2023, doi: 10.9734/jerr/2023/v25i2878